Hello guys. I just bought a Seasonic Prime Ultra Titanium 1000W for my building pc project, and a Cablemod Mod Flex B-series 10/11cable kit, wich is the specific cable kit model for this PSU, considering the Cablemod official site. I presume that the OEM cable kit of this PSU is a high quality cable kit, because Prime Ultra Titanium is the flagship of Seasonic, but I don’t know. Anyway, the recommendation of the manufacturer is to use the OEM cable kit, maybe because they previous tested the performance of the cables and builded for an optimal power delivery to the system, or/and maybe more important, because the OEM cables have inline capacitors for an increased voltage stability. Now, I bought this Cablemod cable kit only for a better look in the case, but I am not sure if using a third party cables is a good ideea for the quality of what the system will recive from the PSU. I observed that such a third party sleeved cables made by different manufacturers ( Cablemod is a very appreciated brand) is frecuently used by some builders, but I don’t know if this is a professional solution, or is just a fashion solution. I read here in this forum that some PSU don’t need an inline capacitors.Plus, in another discution on the Internet, even an Seasonic official representative recommend to a costumer to use Cablemod cables and he evaluate Cablemod as a highend cable manufacturer. So, seems to be good to choose this cable kit.
Question no.1 is using or not this Cablemod kit considering that I don’t know if those cables have inline capacitors ? I am confused about this.
Question no.2 is what is your recommendation for the position of the PSU inside my case - Corsair Obsidian 500 D SE RGB, face up or down ? My case manual show the PSU in a little image with face up, but I am not sure about the right instalation in this case. In the same time, my case have a grill filter at the bottom of the dedicated psu location, and I presume I have to install my psu facing downward, am I right ?
For me, like a beginner in PC building, I am very happy to have found such a great community like yours, and for each time when I talk with you is a big pleasure. Thank you !
Question no.1 is using or not this Cablemod kit considering that I don’t know if those cables have inline capacitors ? I am confused about this.
Question no.2 is what is your recommendation for the position of the PSU inside my case - Corsair Obsidian 500 D SE RGB, face up or down ? My case manual show the PSU in a little image with face up, but I am not sure about the right instalation in this case. In the same time, my case have a grill filter at the bottom of the dedicated psu location, and I presume I have to install my psu facing downward, am I right ?
For me, like a beginner in PC building, I am very happy to have found such a great community like yours, and for each time when I talk with you is a big pleasure. Thank you !
Last edited: