Recover data from 2x fried HDD and 1x SSD

[Very1666]

Hello!
I just fried two HDDs and one ssd in my stationary computer. I'm not sure what went wrong but I switched from a chieftek 750w PSU to a 600w silencer mkiii, both working perfectly but I used a sata power cable (both are modular) from the old chieftek PSU and when I turned the computer on I smelt smoke and immediately shut down the computer and pulled the power cable. All drives were connected with the same power cable, all of them 2.5 inch drives. Now none of them will work, I tried them in my laptop, tried different data ports, cables and power cables. The BIOS doesn't even register them as plugged in.

So my question is; is there anyway to salvage the data on the ssd (mainly) or the two HDDs? By buying a new controller circuit board perhaps?

Any answers will be greatly appreciated.

 

[RookieOfTheYear]

You can recover the data, but it is very very expensive. Like $500 expensive.

 

[ronintexas]

If you need the data - I would recommend a local data recovery shop - like RooieoftheYear said.....it is expensive.

 

[maestro0428]

Yep, you need a forensic style data recovery. I recommend Drive Savers. You will pay the price for not backing up though, possibly into the thousands.... sorry to say.