Repair pci copper/gold? contact pins

flank21

Distinguished
Dec 10, 2007
329
0
18,810
Hello everyone

I recently was doing a case cleaning and noticed that some of my pci contact pins on my video card are cut nearly in half. The pins I am referring to are the ones on the bottom the the card, the ones that actually make contact with the bus itself. The card still works but I was wondering if anyone has any idea how I could repair the pins to prevent any unwanted problems?

the gold pins that make contact with the pci bus in the picture
(used a pic of a wireless card for reference)
WLAN_PCI_Card_cleaned.png


Thanks
 
My first thought would be circuit board repair conductive pen/marker/paint.

I would be more worried about a repair scraping off in the slot(since it is conductive, it may do more harm then anything) when the card is inserted/removed.

If it works, I would just let it be.

Do you have a picture of this half pin.
 

monu_08

Distinguished
May 26, 2011
1,060
0
19,310
yes i did many times and still my gpu runs like a charm i played many games on it with good fps no problem gt430 2gb ddr3 biostar version i played assassin creed revelation at 1366x768 all low settings
 

flank21

Distinguished
Dec 10, 2007
329
0
18,810


thanks for the info, I will check next time I pull my video card out.