Replaced motherboard and now have no video signal

needhelp4sure

Distinguished
Feb 27, 2011
4
0
18,510
0
Hello Community,
I had a home build that was incredibly glitchy, as it constantly would blue screen and restart without warning. After RMAing the RAM and purchasing a new hard drive the issues still remained. After testing the various components I believed that the part that was causing the issues was the motherboard. I replaced the motherboard and put all of the old components back into it, but now I do not get a video signal. The case lights are on and all the fans run, but I am unable to get a video signal. The board has two PCIE slots for the graphics card and I have tried running it from both, but I still get no video output. The graphics card was working fine in the old motherboard and I was able to get a video signal out of ikt. Any suggestions would be greatly appreciated.

MEM: 2x1 sticks of DDR3 1333
MB: MB ASROCK| 870 EXTREME3 R
CPU: AMD|ATH II X3 445 3.1G AM3 RT
VGA: GIGABYTE|GV-N98TGR-512I
PSU: Antec NeoPower 550W
HD: Samsung 1tb sata
 

Similar threads


ASK THE COMMUNITY