[SOLVED] Replaced Processor Computer powers on but no Display

[Jacob26]

So I have probably done something dumb. I decided to replace my processor with a Ryzen 3 2200G, also ended up having to replace my motherboard with the same stock model as the one that I broke. After replacing the motherboard, putting the new processor in place, and putting on the cpu fan with paste applied, my desktop powers on with no display or beep codes. All the fans are running.

I have done the following so far.
Reset the BIOS
Played with the memory stick(moving it to different positions, taking it out entirely) (I only have 1 stick)
Removed everything except for the power, motherboard, cpu.
Switched The monitor.
Tried switching from VGA to HDMI port
Plugged in speakers to try to the beep codes (didn't hear anything)
Taken the motherboard out of the case and tried to run it on the box it came in (No change)

Specs
The computer is a HP Pavilion 570-p000
CPU - Ryzen 3 2200G - AMD
Motherboard - Motherboard HP Pav 570 Willow2 AMD CPU AM4 Socket
Memory - MTA8ATF1G64AZ-2G6H1 Micron 8GB PC4-21300 DDR4-2666MHz

Links
CPU - https://www.newegg.com/amd-ryzen-3-2200g/p/N82E1681**13481
Motherboard - https://www.newegg.com/p/1JW-000M-0...moUTfpBT-knjaci_miqkiyZmFQwGkziwBe53hb1BfJVXc
Memory - https://www.memory4less.com/micron-...9WG5mq61j7I863cUOrl6zgTwxzbQQzIhoCVekQAvD_BwE

Any help is greatly appreciated

 

[COLGeek]

Your motherboard may lack the proper BIOS version to support the 2nd generation Ryzen CPU. To update the BIOS, you need a 1st gen CPU installed to apply the update, before installing the 2nd gen CPU.

This motherboard may not support the 2nd gen CPU at all.

https://support.hp.com/us-en/document/c05408562