[SOLVED] Require some insight for my AIO

[adam9713]

G'day I'm new to Radiator setup all together and I have a 360mm AIO and i want to do a push/pull config I have the fans i'm just unclear about how to mount all 6 fans and the rad to my case. The rad came with long screws to attach the stock fans that come with it but only enough for 3 fans and not my other 3 I would like to install. What mounting hardware would i need to mount the other fans and then all of it to my case.

 

[CountMike]

12 more screws like the ones you have now. Don't have to be original but sme size and thread as original ones, May have to be a tad longer (1 - 2mm) because they would have to go thru mount or case.

 

[adam9713]

12 more screws like the ones you have now. Don't have to be original but sme size and thread as original ones, May have to be a tad longer (1 - 2mm) because they would have to go thru mount or case.

Thanks, That was my first thought just wanted some other opinions.

 

[CountMike]

Screws used for computers are no different than any other standards, nothing specific to computers, most are metric too. A good hardware store should have them but might have to shorten them some.

 

[adam9713]

Went to my only local PC building place and got some advice and screws to do it, Thank you Mike for your help.