Hi guys,
I recently bought the following case:
Thermaltake view 31 Tg Rgb edition
And the following motherboard:
Asus prime z390-a
The case comes with Rgb fans that use a cable that connects to a little board on the back of the case which has 3 holes on the motherboard's end but the motherboard only has a 4-pin aura rgb connector and therefore I am not able to connect it. Also the header on the motherboard is 12V whereas the cable is 5V.
Am I right to assume I will need to buy a separate connector or rgb controller? If so, is there any you would recommend?
I attached a picture of the cable I've got and a sheet that came with the cade which explains how to connect the rgb to the motherboard. Thanks and have a lovely day!
View: https://imgur.com/a/VPuw1XW
View: https://imgur.com/a/kthbxGB
View: https://imgur.com/a/rAcu51x
I recently bought the following case:
Thermaltake view 31 Tg Rgb edition
And the following motherboard:
Asus prime z390-a
The case comes with Rgb fans that use a cable that connects to a little board on the back of the case which has 3 holes on the motherboard's end but the motherboard only has a 4-pin aura rgb connector and therefore I am not able to connect it. Also the header on the motherboard is 12V whereas the cable is 5V.
Am I right to assume I will need to buy a separate connector or rgb controller? If so, is there any you would recommend?
I attached a picture of the cable I've got and a sheet that came with the cade which explains how to connect the rgb to the motherboard. Thanks and have a lovely day!
View: https://imgur.com/a/VPuw1XW
View: https://imgur.com/a/kthbxGB
View: https://imgur.com/a/rAcu51x
Last edited: