RGB Controller adapter grb to rgb

[excelcor]

Does anyone sell a GRB TO RGB adapter? Im finishing a build and have phanteks halos and led strips that are GRB and need to adapt them to rgb.Please help.

 

[glytch5]

Well... so if your using the phanteks thing, i'm guessing you have those actual plugs, not just the 4 little pins right?

What are you trying to hook them up to? If you buy the adapter cables that turn the phanteks header into the 4 pin head... you could simple plug it in backwords and it will work fine... with the phanteks connector you cannot do this. you cooould possible pull the pins and reverse them in the connector... its not terrible hard to do.

 

[excelcor]

yes all the fan tax or four pin the only problem is the green and blue are reversed my friend found a four pin conversion adapter that I used on one and it worked apparently these are made by phantec but I can't seem to find them anywhere

 

[excelcor]

so basically we have three halo fans and three Vantex LED strips 04 plan there is no RGB on the motherboard using a four pin remote controller unit

 

[excelcor]

Problems solved PH-CB_RGB4P by phanteks should do the trick.If you have a set of LED RGB lights wired GRB OR BGR etc, this adapter will set them right to +RGB.SO IF YOU PLUG IN A SET AND THEY WORK BUT GIVE THE WRONG COLOR .Then this is what you need.You can also go through the hassle of resoldering the wires yourself,but make sure your get the 12+ right or poof!