Question RGB Fussion 2.0

May 28, 2019
21
0
10
0
Hello,

I have currently the Sharkoon Nightshark RGB chasis with the 3 built in fans which are "addressable and can be controlled from motherboard software like RGB Fussion". The chasis includes an RGB hub behind it and you can add Addressable RGB LED Fans or Addressable LED Strips on it and control it manually with limited colour effects by pressing the reset switch on the chasis or control it with a mainboard software such as RGB Fussion. I read online that those Fans are compatible with it and I am currently using the Gigabyte 390 AORUS Master mainboard. I decided to plug in the "+5V D ADD_HEADER" so basically not the "VDG" cable (the cable with 3 pin holes) because whenever I try to either my computer won't boot up or it immidiately shuts down. However by pluging the other cable nothing changes except that all the Fans are now glowing strangely and they don't react to the settings which I am trying to set from RGB Fussion. I plugged that "+5V D ADD_HEADER" into the "D_LED1 " connection.

Please help me this problem bugs me really much.
 

ASK THE COMMUNITY

TRENDING THREADS