RGB Lighting on ROG STRIX H270F GAMING

[thnoob]

Well, I'm going to buy a H270F gaming and I wanted to know if i can plug all 3 case fan that come with these pack:

HD120 RGB LED 120mm PWM Fan — Three Pack with Controller + CORSAIR Lighting Node PRO


MOBO:
Internal I/O Ports
1 x AAFP connector
1 x RGB Header(s)
2 x USB 3.1 Gen 1 connector(s) support(s) additional 4 USB 3.1 Gen 1 port(s)
2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
1 x M.2 Socket 3 with M Key, type 2242/2260/2280 storage devices support (both SATA & x2 PCIE mode)
1 x M.2 Socket 3 with M key, type 2242/2260/2280/22110 storage devices support (PCIE 3.0 x 4 mode)
6 x SATA 6Gb/s connector(s)
1 x CPU Fan connector(s)
1 x CPU OPT Fan connector(s)
2 x Chassis Fan connector(s)
1 x AIO_PUMP connector
1 x 24-pin EATX Power connector(s)
1 x 8-pin ATX 12V Power connector(s)
1 x System panel(s) (Chassis intrusion header is inbuilt)
1 x Clear CMOS jumper(s)
1 x 5-pin EXT_FAN(Extension Fan) connector
1 x ROG extension (ROG_EXT) header(s)
1 x 14-1 pin TPM connector
1 x COM port header
1 x T_Sensor Connector
3 x 3D Mount screw port(s)

Thank you!

Is there any way I can use the connectors I have to power up to 6 case fans? (Corsair 400c is the case)[strike][/strike]

 

[Lutfij]

1| According to the manual of the fans, the controller is a stand alone unit and it can control up to 6 fans. These in no shape manner or form connect to an RGB header on the motherboard.

2| Apart from connecting the fans to the controller and having the controller being plugged in to an available SATA power connector from your PSU, there's nothing much you need to do.

3| As far as the CORSAIR Lighting Node PRO, you're going to need to connect it to an available USB port on your motherboard and download Corsair's Link app to control the lighting.

4| Might I ask what the rest of your system's specs looks like? I can't help but think you're buying into the wrong motherboard/chipset.

 

[thnoob]

ignore this answer

 

[thnoob]

1| According to the manual of the fans, the controller is a stand alone unit and it can control up to 6 fans. These in no shape manner or form connect to an RGB header on the motherboard.

2| Apart from connecting the fans to the controller and having the controller being plugged in to an available SATA power connector from your PSU, there's nothing much you need to do.

3| As far as the CORSAIR Lighting Node PRO, you're going to need to connect it to an available USB port on your motherboard and download Corsair's Link app to control the lighting.

4| Might I ask what the rest of your system's specs looks like? I can't help but think you're buying into the wrong motherboard/chipset.

Why you think so? I only said the Mobo...
https://pcpartpicker.com/list/wPcqtJ

Gaming and normal stuff ( no streaming or video editing)
No OC.

The controller only control the LEDs of the fans... I believe that the fan itself should be connected to a Fan Connector (each fan has 2 connector and only one goes into the corsair node pro)