RipJawsZ pc3-19200

[3n3rg3ia]

Hello everyone,

i would like to know if the
[ RipjawsZ] F3-19200CL9Q-16GBZMD (4Gx4)
DDR3-2400 PC3 19200 16GB(4GB x 4)
CL 9-11-11-31-2N 1.65V
XMP Ready for 3rd Generation Intel Core Processors and Z77 platform, are working on AMD platform


i have M5A99FX PRO EVO R.2 witch it was updated recently to be able to equip 2400mhz instead of 2133 with oc.

On G.skills site they clearly say that they work on intel platforms X79 , can i aim on every RipjawsZ i see for my AMD chipsets or i should stick with corsair , i find RipjawsZ cheaper and more valuable memories and anyway the blue heatsink of G.skill is fiting perfectly with my evo ,

thanks in advance.

 

[gskill support]

The memory kit can work just fine as long as you can overclock it properly to achieve DDR3-2400. It is not easy, especially with 4 modules @ DDR3-2400 with AMD CPU. Hopefully you have a very good FX CPU like FX-8350.

Thank you
GSKILL SUPPORT

 

[rojodogg]

Should work with most CPU's but you need to make sure that the MOBO you use will support that speed of memory. You will need a MOBO that is OC capable.

 

[3n3rg3ia]

Ye , thanks for the support guys, after all ill get the asus crosshair v formula z with fx 8350 , I just realized that g.skill series products seems that are really valuable and they got good performance and in the end of the day they cost u cheaper!! Ok I'll go for them no doubt! Thanks again for the support! And according to the oc I just change the DDR freq to the desirable one , always to the tested by factor! Be we'll and best regards!