- Mar 10, 2014
- 171
- 0
- 10,710
Hey guys, I already posted this in the Robo 3D forums, but I was hoping that somebody could help me a little faster. I'll just post a couple pictures and that way you can tell me whats wrong(hopefully)
Robo 3D R1
Printing 1.75mm White PLA from sainsmart
Extruder temp is 230c
Bed temp is 65c
Layer height is .1mm
Infill % is 30%
If you need anything else, please let me know. I just want this to work. I thought that it may be outer shell speed was to fast? I don't really know.
Thanks,
Electonic
http://tinypic.com/r/2dqo5lc/9
Robo 3D R1
Printing 1.75mm White PLA from sainsmart
Extruder temp is 230c
Bed temp is 65c
Layer height is .1mm
Infill % is 30%
If you need anything else, please let me know. I just want this to work. I thought that it may be outer shell speed was to fast? I don't really know.
Thanks,
Electonic
http://tinypic.com/r/2dqo5lc/9
Facebook
Twitter
Instagram