Roccat mouse causing slow booting

[Aleksandar013]

Hello evryone , i have problem with this mouse(Roccat kone pure color phantom white) , this mouse causing my pc to boot very slow, and when i unplug it then pc boots normally..i tried on evry usb slot and still same. then i check in bios if usb leagcy is enabled, with and without drivers but still same, only thing i didnt try is to connect on other pc, so if anyone have solution please help and sorry for bad english, here are my specs:

Pc is Acer aspire m3800
Motherboard: acer G45T/G43T-AM3 v :1.1
Psu: Cooler master B500
Gpu: GTX 560 TI Twin Frozr II
Cpu: Inte Xeon X5450 3ghz( modded from 771 to 775 socket)Cooler is Artic freezer 7 rev 2
Ram: Corsair CMX4GX3M2A1600C9 4gb(2x2gb)
Hdd: WD Caviar blue 7200rpm 32mb
2 more things, mostly this parts are new to pc, psu,cpu,ram and gpu but even on older parts i had same problem. 2 more things to add , is that when i put pc in sleep mode and turn it on again mouse turn on his light and then go off and then i press click again and start to light but cursor dont move so i need to unplug and plug it back again to work.

 

[junkeymonkey]

http://www.roccat.org/en-US/Products/Gaming-Mice/Kone-Pure-Series/Kone-Pure-Color/

error 404 - Wrong way, turn around!

There's nothing going on here. Respawn now and get back to the action by clicking the home button below.

ya, I see the deal on that product now , not even listed in there mouse product page as well ???

maybe something they needed to sweep under the rug ??

anyway sometimes them mice don't work well under windows drivers and you may need to download and install vender drivers for it to work properly

like this kone pure mouse

Downloads




Latest driver
Driver version:
V1.14/FW1.21

Operating systems:

Windows® 10 32 Bit
,
Windows® 10 64 Bit
,
Windows® 7 32 Bit
,
Windows® 7 64 Bit
,
Windows® 8 32 Bit
,
Windows® 8 64 Bit
,
Windows® 8.1 32 Bit
,
Windows® 8.1 64 Bit
,
Windows® Vista 32 Bit
,
Windows® Vista 64 Bit
,
Windows® XP 32 Bit

Changelog:
- Fixed an issue with the button delay

http://www.roccat.org/en-US/Products/Gaming-Mice/Kone-Pure-Series/Kone-Pure/

 

[Aleksandar013]

http://www.roccat.org/en-US/Products/Gaming-Mice/Kone-Pure-Series/Kone-Pure-Color/

error 404 - Wrong way, turn around!

There's nothing going on here. Respawn now and get back to the action by clicking the home button below.

ya, I see the deal on that product now , not even listed in there mouse product page as well ???

maybe something they needed to sweep under the rug ??

anyway sometimes them mice don't work well under windows drivers and you may need to download and install vender drivers for it to work properly

like this kone pure mouse

Downloads




Latest driver
Driver version:
V1.14/FW1.21

Operating systems:

Windows® 10 32 Bit
,
Windows® 10 64 Bit
,
Windows® 7 32 Bit
,
Windows® 7 64 Bit
,
Windows® 8 32 Bit
,
Windows® 8 64 Bit
,
Windows® 8.1 32 Bit
,
Windows® 8.1 64 Bit
,
Windows® Vista 32 Bit
,
Windows® Vista 64 Bit
,
Windows® XP 32 Bit

Changelog:
- Fixed an issue with the button delay

http://www.roccat.org/en-US/Products/Gaming-Mice/Kone-Pure-Series/Kone-Pure/

Hi, tried with 2 vendor drivers and still same, also i unnistaled win drivers for mouse and try again and even put new win7 64 bit will all updateds and still same problem, i gave mouse to friend so he can try it on his pc...i will wrote how that ended up, and about that page error 404 is weird i was watching that page before week or 2 and you had section with that series, nmv mine is Kone pure color ( Phantom White).

 

[Aleksandar013]

Hey, i gave my 2 friends mouse and they have normal boot , so i guess its my motherboard.

 

[junkeymonkey]

may need updated bios , usb or chipset drivers for your board ?? then being a proprietary prebuilt acre may just be nothing you can do .

good luck