Question RTX 2060 Fan2 issue

[Atomglow]

I recently got myself a Palit RTX 2060 Dual OC and i got the following Issue with it. When the card gets under load the second fan drops its rpm to then raises up into incredible speed for just a second. The longer the card runs games the more often it has this problem and it sounds concerning and annoying.

The card itself isn't getting way too hot either or starts to throttle, it just has this really strange behaviour on its second fan. I tried a few thing like controlling if it's properly seated into the pcie slot and installing the latest chipset drivers plus updating the mainboards bios also tried regulating fan speed with afterburner.

I'm looking for any advice, I hope it missed something here.

Anyways, here's a link to a video Benchmark which shows the cards behaviour on the gta5 benchmark (First spike at around 0:55). I can also try making a video about the fan noise if it's needed.

Also a picture of the problem at GPU#1


a

I already thank you all for responses that are made.

 

[Lutfij]

Welcome to the forums, newcomer!

I see what you mean, 1818182 shown in RPM. I would also bring Palit into the picture and the seller to see if the anomaly is with the GPU's controller alone. In fact if it's grounds for an RMA. I would advise any VBIOS flashing to help retain the card in it's out-of-the-box status(in case warranty is disclaimed for VBIOS flashing).

Mind sharing your specs like so:
CPU:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:

include BIOS version for board and the OS version. Which version of Nvidia's drivers are you working with?

 

[Atomglow]

Hello! Sure here we go:

CPU: Intel Core i7 7700k stock clocks
Motherboard: Gigabyte GA-Z270X-Gaming K5 (rev. 1.0) Bios Ver. F9c
Ram: 2x 8GB Corsair Vengeance LPX DDR4-2666 DIMM CL16
SSD/HDD: Samsung QVO 860 1TB
GPU: Palit GeForce RTX 2060 Dual OC
PSU: Thermaltake Berlin 630W 80PLUS Bronze
Chassis: Bitfenix Nova Midi Tower
OS: Windows 10 Pro ver.1903 (Build 18362.657)
Nvidia Driver Version: 442.19

Sorry for being a little late, I still got the issue though.