Question RTX 2060 Super, game crashing, pc crashing, frame drops, bad resolution

Nov 11, 2019
I recently upgraded from a 1060 to the RTX 2060 super, since ive installed the 2060 super ive been experiencing issues. I get BAD frame drops in game, like i will go below 10 frames for 30 seconds then the game will crash or in some instances my whole pc crashes. Also, my resolution says 1920x1080, but everything just looks kind of blurry, words are blurry, in game in blurry, not getting hd gaming while running a displayport/hdmi on ultra settings. I've tried all the troubleshooting ive seen online and nothing seems to work, i want to know if anyone has any ideas before i return the card.

Cpu - AMD Ryzen 2700x 8-core
MB - MSI x470 Gaming m7
RAM - Corsair Vengence 2x16GB
PS - Corsair 750w
NZXT Kraken x62 cooling
Windows 10 64bit
Samsung evo 500gb m.2
GPU - Geforce RTX 2060 Super

Thanks in Advance


In Nvidia control panel have you set the resolution to "PC 1920x1080" rather than FHD 1080p? It usually makes a difference. I've worked on several systems including my current one that would not display correctly when set to the non-PC 1080p resolution.

Also, have you set the correct refresh rate for your monitor in Nvidia control panel as well? It doesn't always default to the correct native refresh rate for some displays and that can cause it to look bad as well.
Aug 5, 2019
Before installing the RTX 2060 super, did you uninstall the gtx 1060s driver? If you didn't, then download DDU, go to safe mode and run the program, then go back to normal and install RTX 2060 supers driver


Running the DDU is always a good idea. Actually, all of this is good to check.

If there are any steps listed here that you have not already done, it would be advisable to do so if for no other reason than to be able to say you've already done it and eliminate that possibility.


make sure your motherboard has the MOST recent BIOS version installed. If it does not, then update. This solves a high number of issues even in cases where the release that is newer than yours makes no mention of improving graphics card or other hardware compatibility. They do not list every change they have made when they post a new BIOS release.


go to the product page for your motherboard on the manufacturer website. Download and install the latest driver versions for the chipset, storage controllers, audio and network adapters. Do not skip installing a newer driver just because you think it is not relevant to the problem you are having. The drivers for one device can often affect ALL other devices and a questionable driver release can cause instability in the OS itself. They don't release new drivers just for fun. If there is a new driver release for a component, there is a good reason for it. The same goes for BIOS updates.

IF you have other hardware installed or attached to the system that are not a part of the systems covered by the motherboard drivers, then go to the support page for THAT component and check to see if there are newer drivers available for that as well. If there are, install them.


Make sure your memory is running at the correct advertised speed in the BIOS. This may require that you set the memory to run at the XMP profile settings. Also, make sure you have the memory installed in the correct slots and that they are running in dual channel which you can check by installing CPU-Z and checking the Memory and SPD tabs. For all modern motherboards that are dual channel memory architectures, from the last ten years at least, if you have two sticks installed they should be in the A2 (Called DDR4_1 on some boards) or B2 (Called DDR4_2 on some boards) which are ALWAYS the SECOND and FOURTH slots over from the CPU socket, counting TOWARDS the edge of the motherboard EXCEPT on boards that only have two memory slots total. In that case, if you have two modules it's not rocket science, but if you have only one, then install it in the A1 or DDR4_1 slot.


Make sure the problem is not just a bad cable or the wrong cable IF this is a display issue. If it is NOT related to a lack of display signal, then skip to the next step.

This happens a lot. Try a different cable or a different TYPE of cable. Sometimes there can be issues with the monitor or card not supporting a specific specification such as HDMI 1.4 vs HDMI 2.0, or even an HDMI output stops working but the Displayport or DVI output still works fine on the graphics card. Always worth checking the cable and trying other cables because cables get run over, bent, bent pins or simply were cheap quality to begin with and something as simple as trying a different cable or different monitor might be all that is required to solve your issue.

The last thing we want to look at,

for now anyhow, is the graphics card drivers. Regardless of whether you "already installed the newest drivers" for your graphics card or not, it is OFTEN a good idea to do a CLEAN install of the graphics card drivers. Just installing over the old drivers OR trying to use what Nvidia and AMD consider a clean install is not good enough and does not usually give the same result as using the Display Driver Uninstaller utility. This has a very high success rate and is always worth a shot.

If you have had both Nvidia and AMD cards installed at any point on that operating system then you will want to run the DDU twice. Once for the old card drivers (ie, Nvidia or AMD) and again for the currently installed graphics card drivers (ie, AMD or Nvidia). So if you had an Nvidia card at some point in the past, run it first for Nvidia and then after that is complete, run it again for AMD if you currently have an AMD card installed.