Hello, this issue of mine started suddenly. One day was everything ok, another day big issues. Picture started to be messy, wierd symbols, colors etc. I got another graphic card and picture is ok, but i cant setup proper resolution and frequency.
I have dual monitor setup with extended desktop, one is some iiyama with native resolution 1920x1080@60Hz connected via HDMI, second one and my primary monitor is BenQ XL2720 1920x1080@144Hz connected via DP (1.3/1.4 cable, new, just bought it today).
When i have bot monitors connected, i cant set the BenQ to 1080p resolution with 144Hz, each reboot changes the option i got, one time its just some 1280x720 and 60Hz, another reboot and i can choose 1080 but only 100Hz and color output can be only YCbCr422 and limited dynamic range.
If i disconnect the second HDMI monitor, i can select full hd and 144Hz.
My gues is that my motherboard could be dying (if not whole card, PCIe slot at least) but i dont how to test it.
Another gues could be power supply.
Any gueses?
EDIT:
My spec:
CPU intel i5-8400
16G DDR4 RAM
M.2 SSD + HDD
Win 10 Pro
MB ASRock Z370M Pro4
PowerSuply 900W
I have dual monitor setup with extended desktop, one is some iiyama with native resolution 1920x1080@60Hz connected via HDMI, second one and my primary monitor is BenQ XL2720 1920x1080@144Hz connected via DP (1.3/1.4 cable, new, just bought it today).
When i have bot monitors connected, i cant set the BenQ to 1080p resolution with 144Hz, each reboot changes the option i got, one time its just some 1280x720 and 60Hz, another reboot and i can choose 1080 but only 100Hz and color output can be only YCbCr422 and limited dynamic range.
If i disconnect the second HDMI monitor, i can select full hd and 144Hz.
My gues is that my motherboard could be dying (if not whole card, PCIe slot at least) but i dont how to test it.
Another gues could be power supply.
Any gueses?
EDIT:
My spec:
CPU intel i5-8400
16G DDR4 RAM
M.2 SSD + HDD
Win 10 Pro
MB ASRock Z370M Pro4
PowerSuply 900W
Last edited: