[SOLVED] rtx 3060 low fps

[FANTAsticmana]

I recently got my new rtx 3060 but my games are running on low fps and i dont know why
My pc specs:
i5-10600K, asus rog strix b460-f, corsair cx650m 650W,

 

[sizzling]

Run userbenchmark and share the public link to the results

What resolution are you running? What games and what fps are you getting?

 

[FANTAsticmana]

Run userbenchmark and share the public link to the results

What resolution are you running? What games and what fps are you getting?

https://www.userbenchmark.com/UserRun/50276579

games are - fortnite and fortnite is around 100 to 150 fps and league of legends is 120 to 170 on low/medium

 

[sizzling]

https://www.userbenchmark.com/UserRun/50276579

games are - fortnite and fortnite is around 100 to 150 fps and league of legends is 120 to 170 on low/medium

Single channel RAM running at 2133mhz, thats likely hurting your performance. Go into the BIOS and turn on XMP and select 3000mhz. You will still be impacted by single channel (1x16gb vs 2x8gb dual channel) but getting the RAM to 3000mhz should help.

 

[FANTAsticmana]

Single channel RAM running at 2133mhz, thats likely hurting your performance. Go into the BIOS and turn on XMP and select 3000mhz. You will still be impacted by single channel (1x16gb vs 2x8gb dual channel) but getting the RAM to 3000mhz should help.

When i changed it to 3000mhz my pc didnt even wanted to run. So i guess i have to buy new ram, can u send me tips about which x2 8gb should i get?

 

[sizzling]

When i changed it to 3000mhz my pc didnt even wanted to run. So i guess i have to buy new ram, can u send me tips about which x2 8gb should i get?

Did you enable XMP or just change the frequency to 3000mhz?

Which slot is the RAM installed in?

 

[FANTAsticmana]

Did you enable XMP or just change the frequency to 3000mhz?

Which slot is the RAM installed in?

MB i just change frequency to 3000mhz but now i enable it and when i enable it it automaticlyy move to 2666hz (or 2600hz) and when i change it to 3000 my pc didnt run up
RAM is installed in 4th slot and first slot is blocked by cooler
I will ask again. Which 2x8gb should i get? cause soon i will sell my old graphic card and i want to upgrade my pc by buying 2x8gb because i know its better for computer

 

[sizzling]

MB i just change frequency to 3000mhz but now i enable it and when i enable it it automaticlyy move to 2666hz (or 2600hz) and when i change it to 3000 my pc didnt run up
RAM is installed in 4th slot and first slot is blocked by cooler
I will ask again. Which 2x8gb should i get? cause soon i will sell my old graphic card and i want to upgrade my pc by buying 2x8gb because i know its better for computer

The motherboard instructions say you should be using the 2nd (B2) slot when using a single stick. That might help reach 3000mhz.

There is also a support section for tested and approved RAM models. ROG STRIX B460-F GAMING | ROG Strix | Gaming Motherboards｜ROG - Republic of Gamers｜ROG United Kingdom (asus.com)

Other RAM can work but if you can keep to this list you should minimise the chance of problems.

 

[FANTAsticmana]

The motherboard instructions say you should be using the 2nd (B2) slot when using a single stick. That might help reach 3000mhz.

There is also a support section for tested and approved RAM models. ROG STRIX B460-F GAMING | ROG Strix | Gaming Motherboards｜ROG - Republic of Gamers｜ROG United Kingdom (asus.com)

Other RAM can work but if you can keep to this list you should minimise the chance of problems.

The problem with second slot is that when i was changing my graphic card my motherboard was showing orange light - DRAM and when i plugged into 4th my pc could easly run up

 

[sizzling]

The problem with second slot is that when i was changing my graphic card my motherboard was showing orange light - DRAM and when i plugged into 4th my pc could easly run up

Any possibility of bent cpu pins?

 

[Zerk2012]

The motherboard instructions say you should be using the 2nd (B2) slot when using a single stick. That might help reach 3000mhz.

There is also a support section for tested and approved RAM models. ROG STRIX B460-F GAMING | ROG Strix | Gaming Motherboards｜ROG - Republic of Gamers｜ROG United Kingdom (asus.com)

Other RAM can work but if you can keep to this list you should minimise the chance of problems.

2666 is probably the limit using a i5 10th gen.

 

[FANTAsticmana]

Any possibility of bent cpu pins?

Idk because on my last graphic card it worked but on the new one it didnt

 

[FANTAsticmana]

2666 is probably the limit using a i5 10th gen.

sooo any chance that with 2x8gb 3200mhz it can get better? with performance in game of course

 

[dotas1]

2666 is probably the limit using a i5 10th gen.

https://rog.asus.com/motherboards/rog-strix/rog-strix-b460-f-gaming-model/spec
The motherboard supports up to 2933.

sooo any chance that with 2x8gb 3200mhz it can get better? with performance in game of course

Up to 2933 and you are good to go

 

[Zerk2012]

https://rog.asus.com/motherboards/rog-strix/rog-strix-b460-f-gaming-model/spec
The motherboard supports up to 2933.


Up to 2933 and you are good to go

* 10th Gen Intel® Core™i9/i7 CPUs support 2933/2800/2666/2400/2133

Bunch of boards drop down in the speed using a i5 or 3.

The first search came up with only 2666 with a i5.

Question - Ram speed stuck on 2666mhz on STRIX B460-F GAMING

Hi guys, Would really appreciate some tips on how to OC my Corsair Vengeance RGB PRO DDR4 3200MHz 16GB 2x8GB DDR4 3200MHz (PC4-25600) CL16 XMP 2.0. I have a STRIX B460-F GAMING and here is the specs for it: https://www.asus.com/Motherboards/ROG-STRIX-B460-F-GAMING/specifications/ First I...

forums.tomshardware.com

 

[FANTAsticmana]

Thank everyone for help <3

 

[dotas1]

* 10th Gen Intel® Core™i9/i7 CPUs support 2933/2800/2666/2400/2133

Bunch of boards drop down in the speed using a i5 or 3.

The first search came up with only 2666 with a i5.

Question - Ram speed stuck on 2666mhz on STRIX B460-F GAMING

Hi guys, Would really appreciate some tips on how to OC my Corsair Vengeance RGB PRO DDR4 3200MHz 16GB 2x8GB DDR4 3200MHz (PC4-25600) CL16 XMP 2.0. I have a STRIX B460-F GAMING and here is the specs for it: https://www.asus.com/Motherboards/ROG-STRIX-B460-F-GAMING/specifications/ First I...

forums.tomshardware.com

Not this one though. It has up to 2933 support for all cpus

 

[Zerk2012]

Not this one though. It has up to 2933 support for all cpus

Sorry but it don't say that it says i9 / i7 10th gen supports 2933. If you look at the link from this site you will see his would also just go to 2666 with a i5.

 

[dotas1]

Sorry but it don't say that it says i9 / i7 10th gen supports 2933. If you look at the link from this site you will see his would also just go to 2666 with a i5.

You missed one VERY crucial word from your quote.
* 10th Gen Intel® Core™i9/i7 CPUs support 2933/2800/2666/2400/2133 natively.

 

[dotas1]

Sorry but it don't say that it says i9 / i7 10th gen supports 2933. If you look at the link from this site you will see his would also just go to 2666 with a i5.

Disregard my comment, I searched about that specific i5 and you are correct. My apologies.