So like my description says my graphics card doesnt show up. Back story i upgraded from a Z590 just wanting to go to DDR5. New CPU (14700K) and Ram Corsair 32GB, Upgraded power supply to a RM1200e as well. Welp got everything plugged up and it only works on my integrated graphics. Its like my 4090 doesnt exist at all. Things ive tried being slightly tech savvy.
Well when i tried slot two i got the same result as the new BIOS flash. Now when i plug my GPU it will not boot. just keeps restarting itself. it would do this same thing in slot two. so now im completely stomped. the computer will boot and run just fine on integrated graphics and my card in the PCI e slot with no power going to it. second i put power to it is cycles restarting over and over (again this is only after BIOS flash) before BIOS flash it would start and run fine but card just didnt exist. Now i will add i just swapped my M.2 over.
HELPPPPPPPP i just wana game again!!!
- Cleared CMOS
- Unplugged and tried all new wires
- Tried Slot two
- Flashed to newest BIOS
Well when i tried slot two i got the same result as the new BIOS flash. Now when i plug my GPU it will not boot. just keeps restarting itself. it would do this same thing in slot two. so now im completely stomped. the computer will boot and run just fine on integrated graphics and my card in the PCI e slot with no power going to it. second i put power to it is cycles restarting over and over (again this is only after BIOS flash) before BIOS flash it would start and run fine but card just didnt exist. Now i will add i just swapped my M.2 over.
HELPPPPPPPP i just wana game again!!!
Last edited:
Facebook
Twitter
Instagram