[SOLVED] Rufus write lock

[SadLandscape]

Rufus write locked my usb pendrive it showed error because of pendrive was open in explorer then after that I got i/o error and now I get access denied error. Whenever I try to format my usb pendrive it says it's write protected.

 

[NoobWhoKnowsNotButTech443]

Try using third party tools to reformat it such as Aomei Partition Assistant..

 

[SadLandscape]

Try using third party tools to reformat it such as Aomei Partition Assistant..

It gave me error code 6

 

[NoobWhoKnowsNotButTech443]

It gave me error code 6

Then You can try deleting(Thus turning it to an "Unallocated Space"), then Create it again..

 

[SadLandscape]

Then You can try deleting(Thus turning it to an "Unallocated Space"), then Create it again..

Ok I'll try right now thanks : )

 

[NoobWhoKnowsNotButTech443]

Ok I'll try right now thanks : )

Keep us Updated

 

[NoobWhoKnowsNotButTech443]

Ok I'll try right now thanks : )

If it didn't work,Do this..
Use Diskpart
Diskpart is a command tool that lets youmanage all storage units that are detected by the computer
1.Goto Cmd with Admin rights
2.Type Diskpart then List Disk
3.Type "Select Disk #" (Replace # with your drive number,If it's Disk 1, select Disk 1)
4.Then Type "Attributes disk clear readonly",then press Enter"..
5.Wait Until Removal is Finished
6.Reboot your PC
7.See if it Worked

 

[SadLandscape]

If it didn't work,Do this..
Use Diskpart
Diskpart is a command tool that lets youmanage all storage units that are detected by the computer
1.Goto Cmd with Admin rights
2.Type Diskpart then List Disk
3.Type "Select Disk #" (Replace # with your drive number,If it's Disk 1, select Disk 1)
4.Then Type "Attributes disk clear readonly",then press Enter"..
5.Wait Until Removal is Finished
6.Reboot your PC
7.See if it Worked

No it didn't work it says operation completed successfully but it didn't disable write protection.

 

[NoobWhoKnowsNotButTech443]

No it didn't work it says operation completed successfully but it didn't disable write protection.

Then Try This..
1.Goto CMD with Admin Rights
2.Type Diskpart then List Disk
3.Type "Select Disk #" (Replace # with your drive number,If it's Disk 1, select Disk 1)
4.Type Clean and Confirm It(If it's not working,Try it multiple Times)
5.Type Create Partition Primary
6.Type Select Partition 1
7.Type Active
8.Type format fs=fat32 quick
9. Wait For It To Finish
10.type Assign then exit
11.See if it Worked

Keep us Updated