I've an old mobo, a Boostar TA890fx, that I've upgrade the graphics card in. It's a RX480 card with extra power connectors on that card. Both connectors are connected to the psu, but there is also an extra molex connector on the mobo. The manual says it's for supplying extra power to graphics card. Do I really need this when the extra connectors on the card itself is connected?
RX480 in a 890fx mobo
- Thread starter Paul_RN
- Start date
010TheMaster010
Honorable
- Jan 25, 2014
- 317
- 0
- 10,860
Have you overclocked your graphics card?
EDIT: Does the manual say when one should have it connected?
EDIT: Does the manual say when one should have it connected?
No OC at all, there is a Phenom II X6. The temps looks fine, so the cooling seems enough. I've even down clocking the gpu to 800MHz, without cigars :-(. I hope it's a driver issue and not the hardware setup.
Edit: the manual doesn't say much more than I wrote initially.
Edit: the manual doesn't say much more than I wrote initially.
010TheMaster010
Honorable
- Jan 25, 2014
- 317
- 0
- 10,860
Fractal design newton r2 800W
Biostar TA890FXE mobo
HyperX savage 240GB SSD
OCZ3G1333 (667MHz) 2x4GB memory
CS crashes with a driver message and the driver restart. The CS process needs to be killed in task manager and CS restart manually.
Biostar TA890FXE mobo
HyperX savage 240GB SSD
OCZ3G1333 (667MHz) 2x4GB memory
CS crashes with a driver message and the driver restart. The CS process needs to be killed in task manager and CS restart manually.
010TheMaster010
Honorable
- Jan 25, 2014
- 317
- 0
- 10,860
TRENDING THREADS
-
-
-
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 4K
-
-
Facebook
Twitter
Instagram