Ryzen 2200g, Black Screen After Driver Update

[ilikecaterpillars]

APU - Ryzen 2200g
Motherboard - ASRock B450 Gaming ITX/ac
RAM - 2X4GB Corsair Vengeance LPX 3200mhz

I've done a clean install of Windows 10 Pro on my HTPC, after putting in a new motherboard and APU. The bios has been updated to the latest p1.70 on the motherboard and the chipset has also been updated.

When I update the drivers for the APU, using the AMD software, all I get is a black screen/no signal, after resetting.
The display adapter, before the update, says Microsoft Basic Display Adapter, but after updating it and before rebooting the system, it changes to AMD Vega.

Internal Graphics Card has been selected in the bios for the primary video adapter, but I'm at a loss as to how to update the drivers.

 

[alexoiu]

Are you using a TV, or monitor? HDMI, or DP?

 

[ilikecaterpillars]

Going into a TV via an HDMI cable.

 

[alexoiu]

Try borrowing a monitor and testing.

 

[ilikecaterpillars]

The motherboard only has an HDMI out, as far as I'm aware, so would that make a difference at all? Sorry if I sound a little dense.

 

[alexoiu]

According to specs, DP also available: https://www.asrock.com/MB/AMD/Fatal1ty%20B450%20Gaming-ITXac/index.asp#Specification
However, you'd test the monitor still with HDMI. Yes, it would make a difference.

 

[ilikecaterpillars]

Brilliant. I'll give it a go then. Thanks for your help and I'll let you know what happens.

 

[alexoiu]

You're welcome. Yes, please update the thread.

 

[ilikecaterpillars]

Very randomly, I thought I'd give it a go using an old Luxor TV I had. I installed the Radeon software with it plugged in, reset it and it all worked! I've now plugged it into my TV, reset it many times to make sure and I'm getting no blank screen. Thank you for your help. I'm not entirely sure the logic behind it working, but something seems to have done it.

 

[alexoiu]

You're welcome. Maybe it needed a "push"

 

[rohanghosh9093]

For me it didnt work i had the same problem