[SOLVED] Ryzen 3 2200G and 12gb ram

[indigo1371]

Good day gentlemen. I have a question about ozu. I installed 4x2 from Crucial, that is, 8GB 2666MHz in total. The Control game ran for about 40 frames, but when I put the exact same 4GB RAM from Crucial at 2666 MHz, then Control began to show around 20 frames, why is that? Or do I need to install 16 GB of RAM?
p.s my motherboard is Gigabyte B450M DS3H

 

[popatim]

Possibly you dropped out of dual channel mode on the ram or you may have dropped down to 1866 speed or both.
Ideally you want 16gb in just 2 sticks running at least at 3200Mhz.

 

[indigo1371]

Possibly you dropped out of dual channel mode on the ram or you may have dropped down to 1866 speed or both.
Ideally you want 16gb in just 2 sticks running at least at 3200Mhz.

Thanks for the answer. I was planning to install a 4x4 from Crucial, can I?

 

[lvt]

Thanks for the answer. I was planning to install a 4x4 from Crucial, can I?

I prefer 2 x 8GB for a bit less electricity consumption 😀

 

[indigo1371]

I prefer 2 x 8GB for a bit less electricity consumption 😀

But I have to sell 3 ram modules and add some money on top to buy 2x8. Not profitable