Ryzen 3 2200G NO DISPLAY

[oliver.catamora]

I built a new system with the following config:

- CPU: Ryzen 3 2200G

- PSU: Corsair VS450

- Motherboard: MSI A320M PRO-VD/S

- RAM: Team Elite 8Gb (x2 4Gb) 2400Mhz

- HDD: Western Digital Caviar Blue Green 1tb

- OS: Windows 10 pro 64bit

When I turned the system on, it powers on, the fans are spinning, numpad led is functioning too but there was no display on my monitor (connected through a VGA cable).


After troubleshooting everything, such as resetting the CMOS, making sure my BIOS is up to date, etc., I borrowed a GPU of my friend and I finally had display!


Is there any way to fix this?

 

[COLGeek]

Are you certain you have a 2200G CPU? Also, are you running the most recent BIOS revision for the motherboard (just to clarify)?

 

[oliver.catamora]

Are you certain you have a 2200G CPU? Also, are you running the most recent BIOS revision for the motherboard (just to clarify)?

Yeah i have Ryzen 3 2200G and im running the updated bios. I borrowed a GPU of my friend and I finally had display!
but when i used Onboard i get No Display.

 

[COLGeek]

Are you using any adapters with the VGA cable to connect to your display? Did you remove the video card when trying to use the on-board video?

With the video card installed , does CPU-Z identify the 2200g properly?

https://www.cpuid.com/softwares/cpu-z.html

 

[oliver.catamora]

Are you using any adapters with the VGA cable to connect to your display? Did you remove the video card when trying to use the on-board video?

With the video card installed , does CPU-Z identify the 2200g properly?

https://www.cpuid.com/softwares/cpu-z.html

i'm currently using VGA to VGA cable i also tried VGA to DVI adapter, still no display even i remove my video card when im on-board.

 

[COLGeek]

Did you run CPU-Z? If so, did it identify the CPU properly?