Hello all.
I recently put together a new system(System 1 in my signature).
I ran thermal stress tests on both system 1 and 2. Here are my results.
System 1:
-Windows 10
-Prime 95 with Blend
-HW Info for monitoring
After ~2 hours, the CPU reached a max temperature of ~88C. HW Info reported the CPU was drawing ~140W of power. The fans on the H100i were spinning at approx 1900RPM(far more noise than when using the system normally)
System 2:
-Windows 10
-Prime 95 with Blend
-HW Info for monitoring
After ~2 hours, the CPU reached a max temperature of ~54C. HW Info reported the CPU was drawing ~80W of power. The fan was spinning on the GAMMAX at ~1000RPM(no appreciable sound increase)
Are these typical thermals? The 5900X consumes about 60W more power than the 2600 so that is quite a bit more.
Thank you.
I recently put together a new system(System 1 in my signature).
I ran thermal stress tests on both system 1 and 2. Here are my results.
System 1:
-Windows 10
-Prime 95 with Blend
-HW Info for monitoring
After ~2 hours, the CPU reached a max temperature of ~88C. HW Info reported the CPU was drawing ~140W of power. The fans on the H100i were spinning at approx 1900RPM(far more noise than when using the system normally)
System 2:
-Windows 10
-Prime 95 with Blend
-HW Info for monitoring
After ~2 hours, the CPU reached a max temperature of ~54C. HW Info reported the CPU was drawing ~80W of power. The fan was spinning on the GAMMAX at ~1000RPM(no appreciable sound increase)
Are these typical thermals? The 5900X consumes about 60W more power than the 2600 so that is quite a bit more.
Thank you.