S.O.S-Need to reset my motherboards bios

[rimartic]

Hi my mainboard is 990fx-gd80-ver2.2 and i was upgrading my bois from inside windows7 with flash drive
After installing and after first reboot my pc turns on but nothing on display ! And these numbers are being shown on board bug numbers continuesly
f2-f9-ff-19-36

What should I do and is there a way to reset or turn everything to default
-
Please help me im f.... ed up!!

 

[The Paladin]

unplug power supply from wall
open case
pop the watch size battery from motherboard
wait 2-3 mins
put battery back on motherboard
close case
apply power cord to computer
turn it on.
if that solves anything you should be able to jump into bios now

 

[atomicWAR]

The Paladin is dead on. Lucky for your your motherboard supports booting from a usb stick for bios in case of a bad flash. Normally a bad flash will turn your motherboard into a paper weight unless it has dual bios or like your board supports bios on usb. Point being this should be fixable.

 

[atomicWAR]

Took the wife out to dinner sorry it took me so long to get back to you. Any USB drive should work according to their info...

M-Flash

Compared to common motherboard which need extra BIOS chips, MSI’s M-Flash has a double advantage which doesn’t need extra components and secondly, all your BIOS data will be saved in the USB drive. The stored data does not only have backup and upgrade function, moreover it can also be seen as a portable BIOS chip which is actually able to boot up your PC.

Features
- Backup/Restore Your BIOS to/from Any USB Flash Disk
- Avoid Unnecessary Repair Due to Accident Failures During The Upgrading Process
- Earn more BIOS Lifespan by Reducing Unnecessary Rewriting Process

As for the how to do it. you need to get the latest Bios on a usb stick here...

https://us.msi.com/Motherboard/support/990FXA-GD80.html

That also has the directions on how to do it but they are not the most indepth. LMK if this is enough to get you fixed up. I am not seeing any walkthroughs online unfortunately. If you can't get it to work you may have to reach out to tech support here...

https://service.msicomputer.com/msi_user/support/ts_form.aspx

Sorry I couldn't be more help for now. Good luck and keep us in the loop!