Sabertooth 990fx Thermal radar PCIE-1 Temp

[kenkou]

Hello, i want to ask u guys what is the recommended temp for the PCIE-1 in the thermal radar? because recently i have 60°C onload in that and show me a message warning i have the latest bios i remember this temp was like 35°C or this is normal?

 

[inzone]

60c is not a good temp for the motherboards pci-e slot , are the fans working?

 

[kenkou]

Yeahp, the fans are working idle is at 49°C i dont know why its happen this :S my PC spec:

Phenom II x4 945 @ 3.5ghz+ cooler master hyper 212 plus
sabertooth 990fx
8GB ram (2x4gb) kingstone hyperx 1600mhz
Evga GTX 460 SC 1gb
caste cooler master elite+front fan+rear fan

 

[inzone]

If the case has onlt two fans then maybe it could use a few more for better circulation inside the case. Maybe add a side fan and a top fan.

 

[Dark Lord of Tech]

Mine is 27 degrees celsius

 

[Dark Lord of Tech]

I'm running the same board.

 

[inzone]

As I said 60c is not a good temp and neither is 49c, you may need to clean out your case fans and maybe add a couple of fans.

 

[Dark Lord of Tech]

I agree , i have that same board and those temps are too high.

 

[kenkou]

I know i dont know why the temps increase so much in the pcie-1, was in the range of 30-40°C but suddenly they turn up... well i will buy another 2 fans, 1 top and 1 side.

how can i put the side fan? throwing air inside the case? and the top fan pulling aire to outside the case?
CASE: Cooler Master Elite 430

 

[inzone]

At least fans are cheap enough so that it's something that you can try that doesn't cost a lot or put you out of service like a motherboard repair.