Hello
I am running two sets, (4 Ram Sticks ), of Kingston HyperX KHX24C11T2K2/8X on my ASUS Z87-A Dual Chanel Mother board with Win 10 64 Bit OS installed. One set of Ram shows 800 Mhz DDR-1600 and the other 667 Mhz DDR1333. The motherboard will not run in XMP mode with both sets installed. If I run only the 677 set it will not run in XMP mode. If I install just the two 800Mhz it will run fine in XMP mode. I bought this ram at the same time, but the only logical conclusion is that one set is either defective or counterfeit. Anyone else run into this?
Rammon info attached: file:///E:/RAMMon%20-%20SPD%20Info.html
I am running two sets, (4 Ram Sticks ), of Kingston HyperX KHX24C11T2K2/8X on my ASUS Z87-A Dual Chanel Mother board with Win 10 64 Bit OS installed. One set of Ram shows 800 Mhz DDR-1600 and the other 667 Mhz DDR1333. The motherboard will not run in XMP mode with both sets installed. If I run only the 677 set it will not run in XMP mode. If I install just the two 800Mhz it will run fine in XMP mode. I bought this ram at the same time, but the only logical conclusion is that one set is either defective or counterfeit. Anyone else run into this?
Rammon info attached: file:///E:/RAMMon%20-%20SPD%20Info.html