[SOLVED] Samsung 970 EVO Plus 2TB not being detected on Gigabyte Z690 UD DDR4 Motherboard (Or windows boot manager)

Status
Not open for further replies.

Jeremopolis

Honorable
Jan 4, 2016
8
2
10,525
0
I have built a new computer but it is not working at the install the OS stage. As the title says, my motherboard's bios is not showing my NVME. I tried to unplug the NVME and plug it back in just in case it was loose or something, but it was not. I cannot try a different port on the motherboard, because the one it's plugged into (m2a_cpu) is the only one with a heatsink. In bios, when looking at the "plug in devices info" tab, m.2 slot info reads:
M2A : N/A
M2P : N/A
M2Q : N/A
and when attempting to run windows boot manager from a usb, the device is not detected as a drive, even after downloading the device drivers onto the same usb. I'm not sure what to do next to get my computer working, as i am unfamiliar with bios settings and have not encountered issues like this before. Other articles i encountered have been entirely unhelpful so far.
 
Status
Not open for further replies.

ASK THE COMMUNITY

TRENDING THREADS