Question Samsung laptop does not boot into windows 7

Feb 12, 2019
3
0
10
0
i have a Samsung N150 plus
yesterday while i was watching YouTube the laptop was not responding it stopped
working so i turned off and then turned it back on but it didn't boot to windows it was stuck
on the loading screen on boot i have tried using hiren bootcd
and doing a low level format and using systemrescuecd
but none of these methods worked
after doing a low level format and trying to install windows 7
the laptop didn't boot to the setup
when i used systemrescuecd it said bios error and a lot of errors
so if anyone can tell me what is going that would be greatly appreciated
 
Feb 12, 2019
34
0
40
1
Alright. try these methods.

Method 1.

  1. Turn on the Computer
  2. Before it can try to boot into windows spam the F8 Key
  3. The option highlighted should be repair this computer
  4. Scroll all the way down to start windows normally and select it
  5. Immediately turn off the computer
  6. Turn it back on and the option highlighted now should be "Launch Startup Repair (Recommended)"
  7. Select it
  8. Let it run and complete, then reboot.
Method 2.
  1. Turn on the Computer
  2. Before it can try to boot into windows spam the F8 Key
  3. The option highlighted should be repair this computer
  4. Select that
  5. Proceed and select the option "Command Prompt"
  6. Type in the following commands:
  7. "bootrec /fixboot" and "bootrec /rebuildbcd"
  8. Reboot
Method 3.
  1. Turn on the Computer
  2. Before it can try to boot into windows spam the F8 Key
  3. The option highlighted should be repair this computer
  4. Scroll 1 option down to safe mode
  5. Select safe mode
  6. Wait for it to boot
  7. Next log in and uninstall any recent apps.
  8. If you didn't install any recent apps, launch cmd (as administrator)
  9. Type the command "sfc /scannow"
  10. Let it run and reboot when finished.
Method 4.
  1. Turn on the Computer
  2. Before it can try to boot into windows spam the F8 Key
  3. The option highlighted should be repair this computer
  4. Select Windows memory diagnostic
  5. Wait for it to tell you any errors and proceed to fix them.
Method 5.

  1. Turn on the Computer
  2. Before it can try to boot into windows spam the F8 Key
  3. The option highlighted should be repair this computer
  4. Select System Restore
  5. Select a time
  6. Wait for restore to finish
 
Last edited:

hang-the-9

Titan
Moderator
What is this system rescue disk you are using? Are you talking about the recovery disks that came with the laptop? What exactly happens when you try to boot off them? Did you just turn it on with the disk in the system or did you also try manually going to the boot device options and selecting the disk? Try making a USB setup of Windows using another computer and boot off that. Did you try a new hard drive?
 
Feb 12, 2019
34
0
40
1
i cant use f8 because it doesnt have windows installed
I'm assuming you have windows 7 and not 10?
Use a windows 7 installation disk and once you are on the setup go to "Repair your computer" and use startup repair. After it finished see if you can boot back. If not, boot back into the install disk and select repair this computer and use cmd. Type the following commands in order.

  1. "bootrec /fix boot"
  2. "bootrec /rebuildbcd"
  3. "sfc /scannow"
If nothing works you will need to go back into the install disk and install windows.
 

Similar threads


ASK THE COMMUNITY

TRENDING THREADS