Samsung ML1210 paper feed problem

[Guest]

Archived from groups: comp.periphs.printers (More info?)

My Samsung ML-1210 has suddenly stopped feeding paper correctly. The
feed turns, but does not pick up the paper. I've tried various
different papers, including one I've used before without problems. I've
also checked for obstructions, turned the printer over, checked for
loose components etc. Anyone encountered and solved this problem, bu
any chance?

If not, looks like I'll have to replace it The annoying thing is that
I've got two unopened toner cartridges, which are worth more between
them than the printer! If anyone in the UK wants to buy them, at say
UKP35 each plus postage, let me know.

 

[Tony]

Archived from groups: comp.periphs.printers (More info?)

I don't know this specific model but I will bet that the problem is a worn
paper pick up roller tyre. This is a universal problem with laser printers and
is related to the number of pages that have been fed. It looks like this
printer has one tray only if so the following part will almost certainly fix it-

Paper Pick-up tire for Samsung ML1210/4500
Paper Pick-Up Tire, Jc73-00018a

Go to
http://www.arbikas.com/spareparts_en.asp?type=spare+parts+-+Samsung+ML1210 for
more info.

It may be wise to replace the Separation pad tyre also-

Separation pad Tire for Samsung ML1210/4500
Separation pad Tire for Samsung ML1210

I suggest that you google for the parts from other suppliers in the UK, there
may also be instructions on how to replace them.
Tony


googlegroups@burrow.demon.co.uk wrote:
>My Samsung ML-1210 has suddenly stopped feeding paper correctly. The
>feed turns, but does not pick up the paper. I've tried various
>different papers, including one I've used before without problems. I've
>also checked for obstructions, turned the printer over, checked for
>loose components etc. Anyone encountered and solved this problem, bu
>any chance?
>
>If not, looks like I'll have to replace it The annoying thing is that
>I've got two unopened toner cartridges, which are worth more between
>them than the printer! If anyone in the UK wants to buy them, at say
>UKP35 each plus postage, let me know.

 

[Guest]

Archived from groups: comp.periphs.printers (More info?)

I can't reply specifically about this printer, but most of the time the
problem is the pick up rollers become glazed or dried out. The fix is
to just clean them.


Rubbing (Isopropyl alcohol) or an orange oil cleaner (used in scant
amount, since it slightly melts some rubbers) usually does it.

If the paper use you tends to be a bit dusty, or has a light clay
component to make it slip better (over the lower sheet) during loading
or to give a cleaner impression, this can transfer to the pick up roller
and make it slippery.

Art

googlegroups@burrow.demon.co.uk wrote:

> My Samsung ML-1210 has suddenly stopped feeding paper correctly. The
> feed turns, but does not pick up the paper. I've tried various
> different papers, including one I've used before without problems. I've
> also checked for obstructions, turned the printer over, checked for
> loose components etc. Anyone encountered and solved this problem, bu
> any chance?
>
> If not, looks like I'll have to replace it The annoying thing is that
> I've got two unopened toner cartridges, which are worth more between
> them than the printer! If anyone in the UK wants to buy them, at say
> UKP35 each plus postage, let me know.
>

 

[Guest]

Archived from groups: comp.periphs.printers (More info?)

Thanks - I'll give it a try.

Arthur Entlich wrote:
> I can't reply specifically about this printer, but most of the time the
> problem is the pick up rollers become glazed or dried out. The fix is
> to just clean them.
>
>
> Rubbing (Isopropyl alcohol) or an orange oil cleaner (used in scant
> amount, since it slightly melts some rubbers) usually does it.
>
> If the paper use you tends to be a bit dusty, or has a light clay
> component to make it slip better (over the lower sheet) during loading
> or to give a cleaner impression, this can transfer to the pick up roller
> and make it slippery.
>
> Art
>
> googlegroups@burrow.demon.co.uk wrote:
>
> > My Samsung ML-1210 has suddenly stopped feeding paper correctly. The
> > feed turns, but does not pick up the paper. I've tried various
> > different papers, including one I've used before without problems. I've
> > also checked for obstructions, turned the printer over, checked for
> > loose components etc. Anyone encountered and solved this problem, bu
> > any chance?
> >
> > If not, looks like I'll have to replace it The annoying thing is that
> > I've got two unopened toner cartridges, which are worth more between
> > them than the printer! If anyone in the UK wants to buy them, at say
> > UKP35 each plus postage, let me know.
> >

 

[gitti]

Have you tried?