- May 6, 2021
- 3
- 0
- 10
Hi guys,
Could use some help on this, as the mighty Google isn't providing much in the way of info.
I have a Samsung UE55JU6800 4K smart telly. It's a little older, but still has great image. In an attempt to improve the user experience without splurging on a shiny new OLED or such, I got my hands on a 2019 Nvidia Shield Tv. Small problem, TV does not want to play ball. If I restart the device, I will get the Nvidia logo for a few seconds, then a flash to black, then a few more seconds, then the no signal/connection/check cables message. Using the tools option on the remote still brings up the Nvidia Shield options, so it's still getting some information from the device. Shield works fine if I plug it into my Acer Predator 27" monitor. A curious note, running my PC into the TV via a GTX 1070 had similar issues until I set the output to 1080p @ 59.97Hz.
Fixes attempted so far:
All HDMI ins.
2 x different cables.
Set HDMI 1 to HDR Support.
Set Shield to 1080 @ various Hz on monitor before connecting to TV.
Attempted pass through via TCL Ray-Danz soundbar.
Updated TV Firmware.
Any assistance would be greatly appreciated. I might try another streaming box, but am loathe to lose the AI Upscaling on the Shield.
Could use some help on this, as the mighty Google isn't providing much in the way of info.
I have a Samsung UE55JU6800 4K smart telly. It's a little older, but still has great image. In an attempt to improve the user experience without splurging on a shiny new OLED or such, I got my hands on a 2019 Nvidia Shield Tv. Small problem, TV does not want to play ball. If I restart the device, I will get the Nvidia logo for a few seconds, then a flash to black, then a few more seconds, then the no signal/connection/check cables message. Using the tools option on the remote still brings up the Nvidia Shield options, so it's still getting some information from the device. Shield works fine if I plug it into my Acer Predator 27" monitor. A curious note, running my PC into the TV via a GTX 1070 had similar issues until I set the output to 1080p @ 59.97Hz.
Fixes attempted so far:
All HDMI ins.
2 x different cables.
Set HDMI 1 to HDR Support.
Set Shield to 1080 @ various Hz on monitor before connecting to TV.
Attempted pass through via TCL Ray-Danz soundbar.
Updated TV Firmware.
Any assistance would be greatly appreciated. I might try another streaming box, but am loathe to lose the AI Upscaling on the Shield.
Last edited:
Facebook
Twitter
Instagram