I have been fighting a problem creating a raid 0 volume with 2 Samsung SSD 980 Pro 4 Gen.
I am using Intel RST/VMD version 19.5
Laptop is Dell Precision 7770 Brand new.
I can create the raid 0 but the laptop will not boot into windows 10
When it boot I get the black screen with the below error
Missing or corrupt bcd entry
bcd error 0xc0000225
I have reinstalled a few times
created the RAID 0 set through the BIOS and the RST application.
I have ran all the fix boot commands
Ran Scan disk, no errors.
recreated the EFI partition
Deleted the bcd store and recreated it.
booted from a different drive into the raid 0 volume
Tried both windows 10 and 11
Moved the SSD into different slots on the MB
If I install windows on a different drive I can access the files on the raid 0 volume, no issues
I have created a raid 1 volume with the 2 ssd's and it works fine.
Any ideas?
I am using Intel RST/VMD version 19.5
Laptop is Dell Precision 7770 Brand new.
I can create the raid 0 but the laptop will not boot into windows 10
When it boot I get the black screen with the below error
Missing or corrupt bcd entry
bcd error 0xc0000225
I have reinstalled a few times
created the RAID 0 set through the BIOS and the RST application.
I have ran all the fix boot commands
Ran Scan disk, no errors.
recreated the EFI partition
Deleted the bcd store and recreated it.
booted from a different drive into the raid 0 volume
Tried both windows 10 and 11
Moved the SSD into different slots on the MB
If I install windows on a different drive I can access the files on the raid 0 volume, no issues
I have created a raid 1 volume with the 2 ssd's and it works fine.
Any ideas?