[SOLVED] Sata cable splitter

[Bxboricua]

Hello,

I was wondering if is safe to connect and power a 3 fan hub and a corsair H60 water pump with this sata cable splitter??

Zheino SATA Power Splitter Cable (2 Pack) SSD Power Cable HDD Power Cable Hard Drive Power Cable 6-Inch/15cm SATA 15 Pin Male to 2xSATA 15 Pin Female Power Y-Splitter Extension Cable https://www.amazon.com/dp/B01MZBDDPM/ref=cm_sw_r_cp_apa_i_maCBCbGVD1M7E



As you could see i only have 2 fan header and 1 pump header, currently running the rear , top and bottom fans with this

SilverStone PWM Fan Hub System Cables, Black (CPF04) https://www.amazon.com/dp/B00VNW556I/ref=cm_sw_r_cp_apa_i_kkCBCbEFSTKRV

 

[What is this Nonsense?]

Some computers won't go past bios, if they cant detect a cpu cooler/pump. So the pump should be connected to the motherboard. I dont have a watercooled pc so i dont know if the water pump speed increases when cpu temp inrease (maybe). So you could allso change the speed to temperature correlation from the bios if it is connected to the MB