[SOLVED] Sata port broken

[Rui Neves]

Hi , today i changed my psu and have to make all connections again so when making that connections again my sata 1 port came off along my sata cable of my ssd , it's safe to use the motherboard without that port and connect the ssd to sata 2 with no problem at all ?

The Motherboard have more than 3 years , so out of warranty

 

[Lutfij]

We will need an image of the issue to understand the extent of the damage. Host the image on Imgur and pass on the link here.

 

[Rui Neves]

We will need an image of the issue to understand the extent of the damage. Host the image on Imgur and pass on the link here.

Sorry about that , since it was the first time this happen to me I had think that only was one way to sata came off so all cases will be the same .... Here's a pic

https://imgur.com/a/0j7NPbD

View: https://imgur.com/a/0j7NPbD

 

[CountMike]

Sorry about that , since it was the first time this happen to me I had think that only was one way to sata came off so all cases will be the same .... Here's a pic

https://imgur.com/a/0j7NPbD

View: https://imgur.com/a/0j7NPbD

It's safe enough providing you don't short the pins. Should be able to replace plastic part though and use a drop of super glue to fix it to MB.

 

[Rui Neves]

It's safe enough providing you don't short the pins. Should be able to replace plastic part though and use a drop of super glue to fix it to MB.

Thank you , after I made the question I broke one of the pins that was close to another to not short anything and since I dont really mind much of losing one port since the MB have 6 and I use 4