Sata wiring diagram

[psychosyd]

I have a Gateway DX4300-04h I recently replaced the power unit, the adapters are all Molex so I took off the sata connectors from the old power unit and put them inline plugged in and started to download updates when I came back the PC was stopped power button was off,but the fans still running,what I want to know is which is correct on a 4 pin setup yellow/ black/black /red or yellow black/red black. The pc will not come on using the power button nor light up,it was downloading fine.

 

[Outlander_04]

you put the sata connectors from the old psu on how?

you cut wires ? Used adapters?

And whats the new psu . It must be old junk if it had no SATA power plugs

 

[psychosyd]

you put the sata connectors from the old psu on how?

you cut wires ? Used adapters?

And whats the new psu . It must be old junk if it had no SATA power plugs

Thanks for the come back, I used the adapters off the old PSU the new psu is an ATX . What is junk to you is not to a lot of seniors and people with low pensions

 

[Outlander_04]

Like this
http://www.satacables.com/sata-power-cables.html

Here is the power arrangement of a molex
http://www.tomshardware.com/reviews/power-supply-specifications-atx-reference,3061-11.html

Its good that you used adapters . Check the pins in the female molex plugs . The wires and terminals just push in, and can easily push out as well