Question Screw size needed for AIO cooler to PC Case

[WithinCrisis]

Asking on behalf of a friend, he recently got a Artic Liquid Freezer II 360 RGB cooler, but it came without screws, and instead of sending it back he just bought a new bracket since that was missing, but he clicked on he also needs screws to mount the cooler to his case.

Just wondering if anyone knows what size screws are needing for screwing the Radiator into the PC Case itself, I know they are small screws but no idea on threading and size.

Any help would be greatly, greatly appreciated.

Liquid Freezer II 360 | Multikompatibler AiO CPU-Wasserkühler | ARCTIC

Die leistungsfähige und multikompatible AiO-CPU-Wasserkühlung Liquid Freezer II 360 ist perfekt auf die Bedürfnisse von Gamern und anspruchsvollen Nutzern abgestimmt.

www.arctic.de

 

[Ralston18]

I found these links:

https://www.reddit.com/r/buildapc/c... screw specification: 6-32,fan width is ~25mm).

https://support.arctic.de/en/lf2-360r3#:~:text=You can replace them using,mounting 2.5" SSD or HDD.

https://linustechtips.com/topic/1314297-arctic-liquid-freezer-360-radiator-screw-size/

Also look in the cooler's installation documentation/specs. There may be some listing of the screws in the parts list.

The most important thing is to carefully pre-thread the screws into the holes to ensure that the screws go in easily without force and/or stripping. Check screw lengths.

Do so before mounting the cooler.

 

[WithinCrisis]

I found these links:

https://www.reddit.com/r/buildapc/comments/zm59zx/arctic_liquid_freezer_ii_radiator_fan_screw/#:~:text=Close-,Arctic Liquid Freezer II radiator fan screw specification: 6-32,fan width is ~25mm).

https://support.arctic.de/en/lf2-360r3#:~:text=You can replace them using,mounting 2.5" SSD or HDD.

https://linustechtips.com/topic/1314297-arctic-liquid-freezer-360-radiator-screw-size/

Also look in the cooler's installation documentation/specs. There may be some listing of the screws in the parts list.

The most important thing is to carefully pre-thread the screws into the holes to ensure that the screws go in easily without force and/or stripping. Check screw lengths.

Do so before mounting the cooler.

The most the manual had was an image of the screw and there being twelve of them, no size guide unfortunately and Artic it seems are a nightmare to get hold of.

But thank you so much!

 

[Ralston18]

👍