Seagate central, twonky = wonky?

[scottfree1_01]

Anyone using the media server on a seagate central (3tb latest firmware)? First issue is it shows 2 instances of twonky are running when I connect via dnla, from ssh "top" it is running 2x

1444 1442 root S N 37248 15% 4% /usr/local/TwonkyVision/twonkyserver -D -appdata /Data/TwonkyData/twonkyconfig

1442 1 root S N 2560 1% 0% /usr/local/TwonkyVision/twonkystarter -D -appdata /Data/TwonkyData/twonkyconfig

Also should the webconfig work? When I goto http://(myip):9000/webconfig none of the settings or media dirs populate?

 

[scottfree1_01]

Anyone? If you have one can you go to http://(yourip):9000/webconfig and see if anything works there, thanks..

 

[scottfree1_01]

Here's the rest of story, this gets the content/beam to webui up and rockin, much thanks to twonk support and a big fu to seagate support..

login with putty user/pw the ones created during setup

sudo curl 127.0.0.1:9000/rpc/set_option?enableweb=2
sudo curl 127.0.0.1:9000/rpc/set_option?enablenmcwebapi=1
sudo curl 127.0.0.1:9000/rpc/set_option?disablewebui=0


Seagate's "help"
Unfortunately, the Twonky service version is not published information so it is unavailable to provide to you. 

In reference to the Twonky server image sent, this also is 3rd party and not related to the Seagate Central directly either. Are you able to use the drive when connected locally and remotely through the Tappin service? This is the extent of the support for this drive. If you are trying to do something outside these parameters, I would refer you to third party sources. "