Seagate SAS 300GB is in yellow when I inserted them to LSI adapter, how can I fix it?

[sumatee]

I bought second hand hard disk drives, Seagate SAS HDD 300GB 2.5", and inserted into IBM x3650 that had LSI RAID Adapter Embedded. I saw those disk information are in yellow color. I am not sure what happened to those hard disk drives. Could you please tell me how to fix those hard disk drive so that they are in blue color as usual?

 

[drtweak]

Looks like they are not configured in any RAID settings. You just have to make a new RAID and then they will change to Configured Good and turn blue. Just make sure there isn't anything on there you need.

 

[sumatee]

I already cleared and made a new RAID array. Those disks are still in yellow color. I am not sure whether those disks are locked or encrypted?

 

[sumatee]

Looks like they are not configured in any RAID settings. You just have to make a new RAID and then they will change to Configured Good and turn blue. Just make sure there isn't anything on there you need.

I already cleared and made a new RAID array. Those disks are still in yellow color. I am not sure whether those disks are locked or encrypted?

 

[drtweak]

If you created a RAID it should show as Configured good and NOT Unconfigured Good.

Do you already have an OS on here or no? If you do boot into the OS and download the MegaRAID Storage Manager and configure the RAID withing windows. Much easier to do.