Hi everyone.
So a couple month back I had an issue where my Hikvision M.2 SSD E1000 1TB would not show up in my BIOS, and I couldn't boot from it obviously. It was under warranty still so I got it replaced by an E3000 1TB, also hikvision. After some independent struggles with other parts, I now basically have a brand new system, apart from my CPU and RAM. The problem with the SSD persists though...
I switch on my PC and it goes to a screen that says it needs repairs. I go into the BIOS and see that the M.2 is not being picked up at all. I switch the PC off, remove the M.2, and just immediately put it back in, switch on the PC and everything works as it should, completely normal. I have 0 idea what the issue is. It's a brand new drive, new motherboard, new PSU... so either my RAM, or CPU is the issue, though I'm not sure how, or it's just a problem with Hikvision somehow? Some motherboard setting? I've done some troubleshooting to no avail.
Any ideas/advice would be appreciated.
Motherboard - ASUS TUF gaming B550-PLUS
CPU - AMD Ryzen 5 2600
PSU - Cooler Master V1000 1000W
GPU - MSI Radeon RX 6600 XT GAMING X
RAM - HyperX [unsure] 16GB 2666 MHz
Drives - WD green 500GB HDD
Biostar 120GB SSD
Hikvision E3000 1TB NVME
So a couple month back I had an issue where my Hikvision M.2 SSD E1000 1TB would not show up in my BIOS, and I couldn't boot from it obviously. It was under warranty still so I got it replaced by an E3000 1TB, also hikvision. After some independent struggles with other parts, I now basically have a brand new system, apart from my CPU and RAM. The problem with the SSD persists though...
I switch on my PC and it goes to a screen that says it needs repairs. I go into the BIOS and see that the M.2 is not being picked up at all. I switch the PC off, remove the M.2, and just immediately put it back in, switch on the PC and everything works as it should, completely normal. I have 0 idea what the issue is. It's a brand new drive, new motherboard, new PSU... so either my RAM, or CPU is the issue, though I'm not sure how, or it's just a problem with Hikvision somehow? Some motherboard setting? I've done some troubleshooting to no avail.
Any ideas/advice would be appreciated.
Motherboard - ASUS TUF gaming B550-PLUS
CPU - AMD Ryzen 5 2600
PSU - Cooler Master V1000 1000W
GPU - MSI Radeon RX 6600 XT GAMING X
RAM - HyperX [unsure] 16GB 2666 MHz
Drives - WD green 500GB HDD
Biostar 120GB SSD
Hikvision E3000 1TB NVME