Sedion 240mm on M5A97 R2.0 doesn't works

[Gurika]

about a year ago i bought a water cooling system... i wanted to install it on my motherboard but when i've installed it, it couldn't cool the CPU.. after that i've rea somewhere that motherboard should have special w-pump connection (3-Pin)... but the in the user manual of Seidon it was written that it can be plugged on Cpu-Fan.. i did that but still no result...


please tell me the solution if anyone has ever had that kind of problem on that motherboard...

 

[clutchc]

The 3-wire pump should be plugged into any sys fan header that can be set to run a 100% at all times. The 4-wire rad fan should be plugged into the cpu fan header so it can be controlled by BIOS just like the original stock cooler's fan was.