So I have a prebuilt computer from CLX and was running into some speed issues (major). I assumed it might've been something wrong with my settings so I tried to start a factory reset. I kept crashing mid-reset and had an issue going through my files so I was told to reset using ISO (from Microsoft). Eventually, I contacted CLX about the issues and it was kinda fixed I was able to run windows at a much slower speed but had access to basic things. I left home and came back upon starting my system everything crashed and wouldn't boot up windows again just my BIOS. CLX was still in contact with me and told me it repeat the steps I did to install windows but it wouldn't work. I've only been able to access my BIO and the last few comments I got from them were that I was doing something wrong I then went over all of the steps with them to still not receive a valid answer to what was wrong. I reset all the settings in the BIOS, changed the boot priority, the USB is fine because it works on my laptop and I used it before to install windows the first time and for some reason, I still can't install windows. The error I'm running into is similar to one I saw here but when I tried the fix it wouldn't work for me.
If anyone could help me I'd appreciate it. If you need any information to help please let me know.
If anyone could help me I'd appreciate it. If you need any information to help please let me know.