Server rack info

[konaguy]

Hello, i got a server rack from a local auction in my town. They couldn't tell me any info on it beside the size. i have been looking for a about a week now and i still cant find any info about it my self. Im trying to find out if anyone here has seen this kind of rack before and could tell me any info on it, it would be very helpfull -Thanks
This is the only markings on the whole rack (bottom left) http://prntscr.com/b3si3q

Here are some other pictures http://prntscr.com/b3so4s , http://prntscr.com/b3soam

 

[kanewolf]

Wright Line racks are made by Eaton. What this looks like is something that was custom tailored from the Lab modular furniture catalog -- http://powerquality.eaton.com/xDomainLitDownload/cross_domain_ll_download.asp?file=LMS%20Brochure%200612.pdf
The shape of the upright posts looks like the uprights shown on PDF page 12 of the brochure I linked.

 

[konaguy]

the frame of the rack is modular. the first picture is the front left bracket, second one is back right to give you an idea of how its put together. it dont state what size holes for mount are in them. i was told it was versa so i bought a set of versa rails for me server but they didn't fit right. In the last picture you can kind of see the screw head right above the post, and the hole at the top dont line up.
http://prntscr.com/b3tfyq , http://prntscr.com/b3tg8f , http://prntscr.com/b3th51

 

[kanewolf]

19 inch racks have either square or round holes. It looks like those rails are configured for square hole verticals. Some of the versa-rails can be converted from square to round by flipping the end piece like this picture

 

[kanewolf]

Also, the spacing of the holes isn't uniform. Moving up or down one hole may allow everything to line up.
Notice in this picture -- http://prnt.sc/b3tg8f how the spacing isn't uniform. The space between the 3rd and 4th from the top is less than other spacing.

 

[konaguy]

i had to mount it backwards to get it to fit between the front and back post. The little round part should come to fit in the hole right? if so the part on the rails is to big for the hole on the rack. right now i have it mounted to where its just one screw on each leg, and its just pulling it tight to the rack, I did not notice that before about the hole sits a 1-2-1-2-1 config.

 

[konaguy]

I will contact eaton and see if they have the versa server rack post. Thanks for all your help