Several different BSOD messages Windows 8.1

[Tori1157]

Hello,

I have had many weird problems with my main rig up through the years, but this beats everything. Everything in my computer is brand new, beside one hard drive(3tb) which is 3-4 years old, this is only used for Steam. Anyway the problem is that i am getting BSOD all the time, it's not only one specific but 8 different BSOD codes so far, which i will list here:

MEMORY_MANAGEMENT
CRITICAL_STRUCTURE_CORRUPTION
IRQL_NOT_LESS_OR_EQUAL
KERNEL_SECURITY_CHECK_FAILURE
BAD_POOL_HEADER
KMODE_EXCEPTION_NOT_HANDLED
PFN_LIST_CORRUPT
SYSTEM_THREAD_EXCEPTION_NOT_HANDELED


They have never been repeated twice after each other, it's always a random pick between these 8.

I recently had a problem where the computer went into a never ending reboot, where it never reached POST as it restarted after 1 second, which happened after i installed SLI 970's, i checked every single wire and everything was connected properly, also checked with a new PSU. After that i connected the "old" PSU back and it started with no problem what so ever.

Here is my pc specs:
CPU: Intel Core i7-4790K 4.4 GHz
GPU-1: EVGA GeForce GTX 970 4GB
GPU-2: EVGA GeForce GTX 970 4GB
PSU: Corsair AX 1200i, 1200W
SSD: Kingston HyperX 3K SSD 240GB 2.5"
Mouse: Cyborg R.A.T. 7 Gaming Mouse - Black
Tower: CM Storm Trooper
Memory: HyperX Fury DDR3 1600MHz 32GB Black
Screen: BenQ 24" LED XL2420T 144HZ
Headset: ASTRO GAMING A40 PC Black with MIXAMP
Gamepad: Razer Sabertooth Xbox360 Controller
Heatsink: Noctua NH-D14 CPU
Keyboard: Corsair Vengeance K70 Black
Soundcard: ASUS ROG Xonar Phoebus
Motherboard: ASUS MAXIMUS VII HERO, Socket-1150
Hard Drives: Seagate Barracuda 2TB, 3TB and 4TB
Fan Controller: NZXT Sentry Mix 2 Fan Control 5,25" Bay


EDIT: I am currently running HDD tests (Seatools) to see if anything show up, so far the SSD and 3TB HDD is fine.

2 EDIT: I have reinstalled windows, taken out one GPU, tested that one, then put in the other one, tested that, and still getting BSOD. I also ran the computer only with the SSD, still getting BSOD. I also wiped all the other HDD's. The test's found nothing wrong with the HDD's. After i had done all this, i got two new BSOD messages, which is the 2 bottom ones on the list above.

I have come to a point where i have no idea what's going on, i'd guess it would be the motherboard maybe? Too much RAM? or the CPU?

I really need some help here guy's, i am running out of ideas.

 

[Tori1157]

I managed to fix this.. somehow not really sure what did it. I plugged every single ram brick out, ran only on the SSD and i plugged one brick in at a time, went into OS installed a few things, shut the computer down and put in a different brick each shutdown(only running 8BG at a time). With every restart i ran the "MEMOK!" thing. There was only one brick that gave me BSOD, so i figured that was a bad brick then, but what do you know i plugged it in again after testing the others and it worked fine. So after this i put in another brick, so i was running 16GB, everything ran smoothly, then put in the rest so i ran 32 GB and woops no more BSOD.

I used well over 15 hours on this, i hope someone... if they ever come over this, can learn from this somehow. Only problem i have atm is that it won't even reach POST, which I've had one time before, where i just rattled in the wiring and it worked fine again... I can swear there is a ghost running around in my computer F***** things up.