I purchased the Lian Li O10 assuming EVGA G3 was small enough to fit, it wasnt...
I am running the Asus x99-deluxe-ii and it requires 24, 8, and 4 pin power and i have not found an sfx psu with those connectors ( well after gpu takes 8 & 6 )
Corsair SF600 has all connectors i need minus the 4 pin so i figured i could just use a Molex to ATX 4-pin cable for now. I am new to this and my questions will probably sound dumb and i'm ok with that, i just want to make sure i don't run into any further issues
Questions
I am running the Asus x99-deluxe-ii and it requires 24, 8, and 4 pin power and i have not found an sfx psu with those connectors ( well after gpu takes 8 & 6 )
Corsair SF600 has all connectors i need minus the 4 pin so i figured i could just use a Molex to ATX 4-pin cable for now. I am new to this and my questions will probably sound dumb and i'm ok with that, i just want to make sure i don't run into any further issues
Questions
■ I will be purchasing sleeved cables. Since the psu is modulate can i just order an extra 4-pin cable and pop it in?
■ Are there any limitations with SFX power supplies that would prevent me from running this build?
■ PPP says power will be about 449w how much higher should i purchase psu wise just to be safe?
Facebook
Twitter
Instagram