Shared Docs...?

[Guest]

Archived from groups: alt.internet.wireless (More info?)

Realtive network newbie here... with a question

I have 5 computers in the house, garages, and shop all connected in
intrafracture mode to a single wireless access point.. no problem
with using any of them....

But one of my old computers (in the one garage) contains an OLD DOS
based program that keeps track of my cars..maintaince, fuel, repairs,
needs etc... I would like to access that program from the house if
possible....using my main desktop computer....

How do I do this... ?

Sorry if this question has been asked...AND ANSWERED a zillion
times...

Bob Griffiths

 

[Guest]

Archived from groups: alt.internet.wireless (More info?)

"Bob G." <rg327_remove_@adelphia.net> wrote in message
news:89gif0tt9lo59h01pk947qniu0nlb4dbk0@4ax.com...
> Realtive network newbie here... with a question
>
> I have 5 computers in the house, garages, and shop all connected in
> intrafracture mode to a single wireless access point.. no problem
> with using any of them....
>
> But one of my old computers (in the one garage) contains an OLD DOS
> based program that keeps track of my cars..maintaince, fuel, repairs,
> needs etc... I would like to access that program from the house if
> possible....using my main desktop computer....
>
> How do I do this... ?
>
> Sorry if this question has been asked...AND ANSWERED a zillion
> times...
>
> Bob Griffiths

This is no different with a wireless network than with a wired network. You
need to install the application on your main desktop computer. Then to
share the data, you must create a network share on the folder containing the
data. If it's not already done, you'll need to enable File and Printer
Sharing before creating the network share.

Ron Bandes, CCNP, CTT+, etc.

 

[Guest]

Archived from groups: alt.internet.wireless (More info?)

>
>This is no different with a wireless network than with a wired network. You
>need to install the application on your main desktop computer. Then to
>share the data, you must create a network share on the folder containing the
>data. If it's not already done, you'll need to enable File and Printer
>Sharing before creating the network share.
>
>Ron Bandes, CCNP, CTT+, etc.
>
Thank you very much Ron.... Sure too all of a 10 minutes to set up...
Works fine...

Bob Giffiths