[SOLVED] Sharkoon Pure Steel RGB White

cordeirooo

Distinguished
Dec 22, 2012
69
3
18,545
For some reason one of the fan's LED is not working. I understand it is not spinning because the mobo only has support for two extra, but I don't get why one of them is totally out.

Here's some photos:





My power supply (Thermaltake Smart Pro RGB 850W) doesn't have those round connectors, is that the issue?
 
Solution
Four fans now installed and only three working - correct?

"Support for two extra"? Is that one fan plus 2 extra for a total of 3 fans?

Swap the non-working fan's connection with a working fan's connection.

Determine if the failure follows the fan or stays with the connection.

Ralston18

Titan
Moderator
Four fans now installed and only three working - correct?

"Support for two extra"? Is that one fan plus 2 extra for a total of 3 fans?

Swap the non-working fan's connection with a working fan's connection.

Determine if the failure follows the fan or stays with the connection.
 
Solution

cordeirooo

Distinguished
Dec 22, 2012
69
3
18,545
They are five in total: three at the bottom (front bottom not lighting up), one at the rear and one on the cpu.

Just did as you instructed. They all work now. There was a cable a bit loose.

EDIT: Solved.
 
Last edited: