Hello all,
I get significant shuttering when overclocking my video card then playing Crysis. I upped the volts and put everything to generous levels basing my overclocks on my website and users common overclock levels. I will provide a few that I have found.
--1.18v 900*1150
--Here’s the result of their overclocking:
* HD 5850 (Stock) = 725MHz Core / 1000MHz RAM
* HD 5850 (OC) = 800MHz Core / 1175MHz RAM
* HD 5850 (OC+1.15V) = 875MHz Core / 1175MHz RAM
* HD 5850 (OC+1.225V) = 925MHz Core / 1175MHz RAM
I have used these values for my overclock attempts and even upped voltage to make sure everything is fine... and still run into shuttering/almost freezing screens. Keep in mind this is the top of the line 5850 card so it should be the most 'overclockable' variety correct?
Anything above 800/1125 will shutter/throttle the system. I hope/fear it is my power supply because I am generously applying voltage to all other components. Otherwise I could be another issue I have not considered.
Using ATI Tools + MSI Afterburner for OC'ing.
E8400 (E0) @ 3.6 on 1.275v (Temps are fine with my Sunbeam Core Contact Cooler, I think)
GSkill Pi Black 800 @ 840 on 1.9v
XFX Black 5850 @ 800/1125 on 1.2v (under 70 C)
OCZ stealthxstream 600 watt with four 18A rails (here is linky for reference)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817341010&cm_re=stealthxstream-_-17-341-010-_-Product
3 7200 hard drive + combo drive.
Also I only got 17300 on 3dmark2006... isnt that kinda low for a system like this?
I get significant shuttering when overclocking my video card then playing Crysis. I upped the volts and put everything to generous levels basing my overclocks on my website and users common overclock levels. I will provide a few that I have found.
--1.18v 900*1150
--Here’s the result of their overclocking:
* HD 5850 (Stock) = 725MHz Core / 1000MHz RAM
* HD 5850 (OC) = 800MHz Core / 1175MHz RAM
* HD 5850 (OC+1.15V) = 875MHz Core / 1175MHz RAM
* HD 5850 (OC+1.225V) = 925MHz Core / 1175MHz RAM
I have used these values for my overclock attempts and even upped voltage to make sure everything is fine... and still run into shuttering/almost freezing screens. Keep in mind this is the top of the line 5850 card so it should be the most 'overclockable' variety correct?
Anything above 800/1125 will shutter/throttle the system. I hope/fear it is my power supply because I am generously applying voltage to all other components. Otherwise I could be another issue I have not considered.
Using ATI Tools + MSI Afterburner for OC'ing.
E8400 (E0) @ 3.6 on 1.275v (Temps are fine with my Sunbeam Core Contact Cooler, I think)
GSkill Pi Black 800 @ 840 on 1.9v
XFX Black 5850 @ 800/1125 on 1.2v (under 70 C)
OCZ stealthxstream 600 watt with four 18A rails (here is linky for reference)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817341010&cm_re=stealthxstream-_-17-341-010-_-Product
3 7200 hard drive + combo drive.
Also I only got 17300 on 3dmark2006... isnt that kinda low for a system like this?
