Silverstone Sugo SG13b

WidowmakerIsBae

Commendable
May 13, 2016
12
0
1,510
Starting my first PC gaming rig build and I love the small compact Silverstone Sugo SG13b. I am worried that with such a small build and with close wire/internal proximity that the CPU might overheat without a sufficient water cooled system. I would prefer to use a water cooled system rather than an air cooled one. Does anyone know if the Corsair H55 with have enough clearance to fit in the case and also still have room for cable management?
 
Solution
Hello,

As long as you have a mounting position for the radiator, it's fine on the clearance side. But Corsair h55 isn't a reasonable purchase. Consider buying h80 or h80i. Corsair h55 and Coolermaster Hyper 212x perform almost the same.

I assume you are planning on overclocking. If not The stock cooler would be more than fine.

On the cable management side, Just don't over think it. Make sure it doesn't look messy. Watch some Mini-ITX builds on YouTube and get some ideas on cable management.

Hope this helped and Good Luck :)
Hello,

As long as you have a mounting position for the radiator, it's fine on the clearance side. But Corsair h55 isn't a reasonable purchase. Consider buying h80 or h80i. Corsair h55 and Coolermaster Hyper 212x perform almost the same.

I assume you are planning on overclocking. If not The stock cooler would be more than fine.

On the cable management side, Just don't over think it. Make sure it doesn't look messy. Watch some Mini-ITX builds on YouTube and get some ideas on cable management.

Hope this helped and Good Luck :)
 
Solution


Thanks! I was looking into the H80i :) though I wont be doing much overclocking. Like I said this is really my first build and I don't really want to wear down my graphics card or CPU and I don't plan on running the machine non stop either. Thanks a lot for the help :) always appreciated!