Slim tower case that takes full size (ATX) power supply?

[raydur1]

I'm having trouble finding a computer case that meets the following requirements:

Slim tower style - width (when standing up) must be less than 6.5 inches.
Uses a "normal" (ATX) power supply.
Space for two 3.5" Hard drives and one SSD. Doesn't matter if it has a 5.25" bay.
Front USB 3.0 port(s).
Can use any size motherboard - mini-ITX. microATX. ATX, etc.
Simple aesthetics (will be visible in the living room and needs to be acceptable to the wife).
Prefer full height expansion slot, but not a deal-breaker...
Cheaper the better - prefer less than $60 (without power supply), but can go higher if it's "perfect"...

Anyone got any ideas?

Thanks!

 

[logainofhades]

I do not think such a thing exists.

 

[Chayan4400]

The ATX PSU form factor is 5.4" alone. I doubt you'll be able to find such a case. What about the NZXT S340? It's wider, but stilll smaller than many comparable cases.

 

[logainofhades]

After some thought, you might find what you are looking for, in an HTPC case.

 

[Chayan4400]

After some thought, you might find what you are looking for, in an HTPC case.

I considered that too, but most HTPC cases that are long and thin are meant for horizontal use (Feet only on one side, interal layout often has vents on the sides), and wouldn't make very good SFF-towers. Those that are made for vertical use (Namely Silverstone's RVZ01/02) support only SFX PSUs.

 

[Barty1884]

Fails from the price & ATX support standpoint, but one to consider:

Bitfenix Pandora: https://www.bitfenix.com/global/en/products/chassis/pandora#overview

6.3" wide. mATX & mITX, "normal" PSU support. 2x 3.5" bays & 3x 2.5" bays. Can't seem to confirm is those are independent of each other though.

$112 though. http://pcpartpicker.com/part/bitfenix-case-bfcpan300kswl1rp