Question Slots

Jan 27, 2021
10
3
15
So basically I just built a pc from scratch (except graphics card).. I booted it fine but it displayed that it would be better to change my 8gb ram from slot 1 and 3 to 2 and 4.. So I did that only to see that I had no signal on my screen and my periphelicals would not work..

Motherboard: MSI MAG B40M MORTAR
Ram:G.skill RipjawsV 16GB DDR4-3200MHz
 

Endre

Reputable
So basically I just built a pc from scratch (except graphics card).. I booted it fine but it displayed that it would be better to change my 8gb ram from slot 1 and 3 to 2 and 4.. So I did that only to see that I had no signal on my screen and my periphelicals would not work..

Motherboard: MSI MAG B40M MORTAR
Ram:G.skill RipjawsV 16GB DDR4-3200MHz

Please take out, then re-seat the memory modules into their slots.
 
Jan 27, 2021
10
3
15
Ok and if you put them in slot 1 and 3,is all 16gb recognized?
Do they work at 3200mhz when you turn xmp on?
I haven't checked out, but they work on 2900 mhz cause the motherboard isn't fully compatible, but If it works on 1 and 3 should I keep it there and just not care about notification I get every time I boot the pc?